How to Spot Evidence of Water Damage in Your Home

Water damage restoration can be a very complicated problem because most of the time it happens out of look.  A water leak from a fixture or equipment, seepage from heavy rainwater, and even condensation may cause harm and even mildew growth beneath surfaces or behind wall surfaces and ceilings.  Allowing unseen water damage and mould to spread is dangerous because the damaged materials can be weakened from absorbing the water which could lead to significant structural harm.  The occurrence of excess wetness can also cause invisible mold development which can have serious implications for the sake of your loved ones.

By recognising these common signs of water damage and mold, you can act before hidden water damage causes serious issues you need water damage restoration.

Searching for Water Damage Outside

The angle of the bottom around your home can help determine whether you may have water damage to the cellar or basis.  When looking at for water damage outside, determine if the ground slopes far from home.  If not, then the angle of the bottom could be leading to more water to communicatehome which increases the risk of water damage and moldto the foundation or basement.

After inspecting the slope of the ground, check the surface of your home for signs or symptoms of water damage restoration.  Be sure you check the downspouts and gutters to ensure that they are intact and diverting water away from the house.  When the downspouts and gutters are blocked or not diverting this properly, the bottom around the home will get moist which could have an effect on your cellar or foundation.  You should also check the rooftop for any missing shingles or other harm that could allow leakages in your attic.  Finally, examine your doors and windows to make sure these are properly sealed.

Searching for Water Damage Inside

Listed below are the most typical signs of invisible water damage inside your home to consider:

  • Water wedding rings on wall space or ceilings
  • Sagging floor places around fittings or appliances such as

Continue reading

A preview on water damage restoration.

Water Damage Restoration is the process of repairing any house or property to its previous pre-loss condition. Damage to the property could be due to an overflow, a disaster such as a flood or any other water damage event. The water damage restoration process involves many several key procedures like water contamination levels and decontaminating and drying the structure. Mainly, there are two large certifying bodies, the RIA (Restoration Industry Association) and the IICRC (Institute of Inspection, Cleaning, and Restoration Certification) that recommends standards and precautions for water damage restoration. Most important standards for water damage restoration include:

  • Dealing with Categorization and Assessment

Loss evaluation is the first and the at most important step in water damage restoration. The assessment has to be correct so that an appropriate response can be taken. The damage caused by water should be managed by technicians and other insurance companies to understand what is damaged and what could be done in restoring the damage. Identifying the primary source of the damage is also important. Proper documentation of harm should be maintained, and accurate estimates should also be reported. Categorization should be based on the contamination levels of the water source. The categories include cleaning the water sources like pipes, toilets, and sinks. Contaminated water in dishwasher or washing machine should be disposed of and kept clean. Sewage water and water from the toilet with feces or any standing water with microbial growth and floodwater should be flushed. Check here.


  • Decontamination and Drying

Once the evaluation is complete, the process of drying and decontaminating should. This should be based on the extent of damage or damage caused due to water. This can be classified into four types. Class 1 damage is restricted to a small area where less water has been absorbed by materials. Type 2 damage is extended to the entire room and carpet area. Class 3 loss is when the whole area is saturated with water and Class 4 damage when the water has done extensive damage. Decontamination and drying is an …

Continue reading

Things To Take Into Consideration, Should You Decide To Buy Custom Kitchen Cabinets


If money is no object, and you want a truly original, one off, and unique kitchen, then custom kitchen cabinets are the way to go. Custom kitchen cabinets give you the ultimate control and choice, allowing you to add your own quirkiness or personality on the kitchen. When you consider that it is the cabinets and work surfaces that give a kitchen life, you are in a truly unique position, but there are certain things you need to consider before choosing and ordering your cabinets.


If you are buying stock kitchen cabinets from a large company, there are certain inbuilt benefits. There is likely to have been significant testing done on mass produced cabinets, and there will be some form of guarantee against staining and wear and tear. A kitchen is quite a considerable investment, after all, so you don’t want to spill the pickled beetroot once, to find your white cabinet door soaks up the purple color like a sponge. If you are employing a one man band, they obviously won’t have the resources to test products so rigorously. So make certain to ask what the guarantee period is, and what would the procedure be should disaster strike.


Perhaps the most important thing about the kitchen especially when you have the option of designing It from scratch is to utilize the space to its full potential. Many people obsess over the color scheme of the cabinets, but over time, it is always possible to change that, but once you have chosen the units, you are pretty much stuck with those forever. Do you need a wine rack? Have you made good use of the corner areas? Visit kitchen showrooms and steal their ideas, so you can show your designer exactly what you want.

Color Choice

The size of your kitchen area should have an influence on your color choices. If you have a relatively small kitchen, you would be best advised to choose light colored woods, such as oak or maple, as these make the room look …

Continue reading

Is your home prone to flooding during every passing storm?

Home Sump Pump

A good pump will be an important asset at the time of flooding during the rainy season. It is an economical solution to keep the residential basement dry, as it doesn’t cost much. It is used to empty the pools, flooded basements, and fountains and to clear out the sump. According to the superior pump reviews, Superior Pump 91250 1/4 HP Thermoplastic Submersible Utility Pump is the best sump pump available in the market, which is both cost efficient and reliable.

The pump is built with a robust design to last long and is made up of high-quality components. This one-piece thermoplastic housing is fully waterproof. It is valued for its ability of continuous usage. It can run long without any interruption. A wire mesh has been screwed through the intake to prevent the dust from entering into the pump. This mesh can be cleaned easily. It is an electrical pump and can be plugged anywhere. This pump is operated manually, with the help of a float switch. It has a motor of ¼ horsepower. So, it can easily pump out 30 gallons of water per minute.

This pump is specially designed for domestic use. It contains a 10 feet replaceable and water-resistant cord that makes it submersible. It is fitted with a garden hosepipe adapter and a 1-1/4 inch iron pipeline discharge thread. It is thermally protected with a high efficient, 3.8-amp motor. It is also known for its durability. This is a CSA certified Superior Pump for reliability and protection. It also comes with a one-year limited warranty. It is an ultra-portable and light-duty pump for emergency water removal.

Details of Superior Pump 91250 are as follows –

  • Pump type – It is a corded electric pedestal sump pump.
  • Manufacturer – It is manufactured by Superior Pumps.
  • Cord length – Length of the cord is 10 feet.
  • Inlet style – It has the power of bottom suction with 1/8 inch filter.
  • Discharge size – It has 1.25 inch MPT, with 0.75 inch garden hose adapter.
  • Housing

Continue reading

Water Damage Classification Criteria

Water damage restoration can seem overwhelming. In fact, most people unlucky enough to suffer through water damage chalk it up as one of the biggest disaster they have to suffer through as property owners. There’s a surprising number of circumstances, however, that can cause water damage, from the simple woes of a leaking roof down to a burst pump or geyser or even natural flooding. Trying to work out how severe the damage has been can be difficult, particularly in times of stress, so here’s some tips to help. Remember that you are highly likely to need the intervention of a professional in the field as well as your insurance company for most events.

How do you classify orange county water damage restoration needs?

The easiest way to classify your water damage is to think of a class system. You are going to take it from a simple, minimal class one right through to a severe class four. Below, we’re going to look at a little more of what makes your particular damage fit each category.

Water damage restoration starts at class one. Class one water damage is really very minimal, affecting a small area with little absorption into damageable surfaces. It’s likely to be uncostly, and is usually caused by very small leaks like a loose tile on the roof or a couple of over enthusiastic toddlers wrecking something. Chances are you won’t even need a professional to get this one sorted, and it’s usually the type of task you can undertake as an enthusiastic DIYer.

What happens if I need more severe, professional water damage restoration?

Class two water damage usually needs a professional water damage restoration service. Think of it as whole-room damage. Wooden materials will likely be damaged. Remember that structural wood will particularly need attention. Mild flooding will cause class two damage, as it’s usually characterised by a low flooding height. Mostly, the water was removed before structural damage occurred. Class 3 damage is more severe and effected the building itself. Celling collapse or burst …

Continue reading

Tasks to do before Water Damage Repair

After your home experiences water damage, you’ll likely be interested in a professional company conducting repairs. However, before the company arrives there are some steps you can take to help minimize the damage that occurs before they begin restoring your home or office. That’s critical so the Boca Raton water damage professionals will be able to optimize their work.

Here are some easy steps you can take:

  1. Remove water from wood furniture

This step should be taken after removing laps/tabletop items from the furniture. Water can do major damage to wood furniture, which is likely a situation you want to avoid. That’s especially true when the furniture is made of expensive wood that can be very expensive to repair or replace. On the other hand, removing water from the exterior of furniture can help to protect it and prolong its life. In fact, there’s a chance that minimal restoration for the furniture will be required, which can help to reduce the costs due to lower restoration costs and even the cost of replacing wood furniture.

  1. Use mopping/blotting to remove excess water

Unfortunately you likely don’t have the tools to make the area completely dry. However, mopping and blotting can help to remove the excess water from the floor and other areas. The key is to remove the vast majority of the water, in order to help minimize the damage caused by the water damage. That will allow the professionals to perform a better job, which is definitely a plus. On the other hand, if the floors and other areas are soaked they’ll be able to cause more damage, which is a situation you’ll want to avoid.

  1. Pick up loose items lying on the floor

This is another important issue as the floor is an area with some of the most moisture. That’s why you should pick up loose items that are sitting on the floor. It will protect them and make the work of the restoration company easier.

  1. Turn air conditioning on during summer

This is an easy yet effective …

Continue reading

Stucco Work in Toronto

Located in Ontario in the Greater Toronto Area. Local business Toronto Stucco & stone work specialists committed to offering permanent, Eco­friendly, Canadian made affordable solutions. An expert company in its area of specialization. They have been exposed to extensive training programs and therefore exposed and experienced in residential design projects, commercial design solutions as well municipality projects.

Stucco Toronto have been offering expert services to fulfill the concrete and stone needs for both commercial and residential housing solutions.

At Stucco Toronto you deal with Canadian stucco experts who have over 10 years of expertise and experience in stucco building, design, stucco restoration, exterior Insulation and finishing systems (EIF). They also deal with stucco crack repairs, water damage and vandalism. The experts work with their clients in a consultative manner from the start to the end of each single project. With lots of knowledge and experience, they are able to courteously attend to every single detail of any proposed stucco project offering uniqueness and different solutions to the different projects as assigned. All this takes in to account the client’s needs, time and cost.

Today, Stucco has become a very attractive solution in home finishing. It is effective in adding a touch of class and modern look to any specific old and lifeless building. It also is a cost­friendly answer for raising the property valuation of a building to be put up for sale.

Stucco Toronto offers the following services:


A highly attractive home finishing solution. Stucco as a material is made up of water, aggregate and binder laid over a metal lath. This is usually done by applying it wet which later dries up into a very dense and hard solid. Mainly used for ceilings and external wall decorations. Standing out to be very useful as a building material specifically in exterior finishing, it is attractive, durable and does not require high level of maintenance. Paint can be mixed with the stucco such that the design will not require painting after stucco is in place.

Exterior Insulation Finishing System …

Continue reading

Advise For Hiring a Water Restoration Contractor

Hiring a Water Damage Restoration Contractor

There are a few things homeowners need to know when looking for and working with a restoration contractor. This useful advise will save you time, money and headaches.

Hire a state-licensed contractor; Check the contractor’s license number and business name at your state’s professional license board or department online. Each State regulates what a licensed contractor can require as payment upfront so verify that information.

Make sure they are fully trained in all the services they provide; including water extraction, water cleanup and water damage repair.

Check out their reputation. See if there are any consumer complaints against the company. Look them up at BBB online. Ask the company for a list of references and verify them.

Verify the company’s address and phone number; Call them to make sure they answers their phone live and that they are willing to answer any questions you have. Use a local company. Check with the International Cleaning and Restoration Association (ICRA) website or search for Cleaning and Restoration Association (CRA) Select Members by using the CRA search page.

Make sure the company is bonded and insured; It’s essential that any company you use has adequate liability coverage for work related damages. Make sure your contractor also carries workman’s compensation insurance for job related injury or health risks. You are fully allowed to request to see proof of the company’s insurance. They also need to be bonded. A bond protects the homeowner if the contractor doesn’t adhere to the terms of the contract. Before they begin any work on your home, make sure your contractor’s bond is valid with a limit high enough to fully cover the cost of completing or re-doing the restoration work you need.

Require the company to abide by industry standards; There are two relevant industry standards that restorers should follow. The first is the ANSI/IICRC Standard and Reference Guide for Professional Water Damage Restoration, and the second is the ANSI/IICRC Standard and Reference Guide for Professional Mold Remediation. Other standards might also apply depending on the damage.

Get competitive

Continue reading

Understanding the term ‘dry standard’ in the water damage industry

There are various terms that you use on a regular basis, but lots of people are unaware of these terms. In fact, there are various languages and each language has its own way to express one thing. For instance, the name of a particular system can be different in various languages. There is a particular equipment designed for water damage restoration orange county by NASA and it can be useful for lots of people. Keep it in mind that after inventing any new system, such as water damage restoration or any other, it is important to educate your customers. With proper knowledge and information, your customer will feel more comfortable and confident. The focus of this writing piece is a particular term “Dry Standard”. It is used for the water damage projects.

Explanation of Dry Standard

The water cleanup services mean removing water and make the structure completely dry. Everyone can remove standing water with the help of right equipment. The right equipment can make your work easy, but the challenging part of this job is removing moisture at the end of this work. This challenging work is often done by the water damage restoration service provider. Structural drying is an important process and this job is often done to achieve the dry standard.

If you want to achieve dry standard, it is important to clean any soaked surface make it completely dry to the same level as it was before it got wet. It is true that every surface in your home has some moisture in them and you have to maintain the appearance and functionality up to dry surface. The water damage restoration service will prove helpful for you. Each and every type of surface requires a particular amount of moisture and it is not over-drying and under-drying challenges.

What happens in the absence of dry standard?

If you are unable to follow water damage restoration orange county standard, then you may have black mold. It is important to get the services of a professional company to get …

Continue reading

The process of water damage remediation properties in Orange County

water damage remediation

Water damage restoration is not the game of the kid. It needs some systematic steps to follow. So, it is better to kept it done through professionals. While keeping in view the area of Orange County, you can better go for the professionals. Especially for your residential or commercial areas where you are living and working you must not poke your nose by yourself. Water damage remediation will be in need of special services. Just getting your heads together and trying to fix it by yourself will be like “many cooks spoil the broth”. So, better is to go for the option of remediation professionals.

What process they will use?

The professionals will use a proper process of restoration. It can be in steps. The highly skilled professionals of Water damage restoration Orange County are using the process like:

Fixating the point of damage:

First of all, either through natural or through technical way they identify the spots of water damage. In the sensitive areas like under the ground or under carpet, they uses special type of machinery in order to detect which area is infected the most.


Any of the water damage first of all needs drying. So, the Water damage restoration orange County professionals use various methods of drying in order to start sorting out the problems. They recesses or increases the temperature of the area up to an extent that can really dry the area of the product.

Implementation of remedial method:

After that, in accord of the area and requirement, the professionals start implementing the water damage remedial method. It can be sniffing, drying, de contaminating, de-humiliation, debris extraction and so on.

What about the docs? Are they restorable?

With amusing fact, the professionals of water damage restoration have invented many new ways of restoring the documents as well. SO, now you can even restore your best assets as well. If there is any of the original significant doc that has been decayed because of the water damage can be restored by the bliss full …

Continue reading